Wednesday, July 10, 2013

The summer of 2013 - with fire and ash

People who live here in las Vegas are well aware of the fire going on up on Mt. Charleston, but I don't think it's getting much attention anywhere else. 

The fire has been burning since July 1, starting with a lightning strike. Since then, it's grown to 40 square miles, and just today, it took its first six structures. 

The sky is amazing - scary and ominous. 


 Almost everywhere you drive, you'll see cars parked on the side of the road, with people taking pictures. Luckily, the fire is pretty far away, but damn... it sure is scary looking.   

Here are a few of the shots my friends or I have taken.... wow!  This is from my neighborhood,


 and this is about a mile away from my house, when the sky was raining ashes. 


It's weird - the sky reminds me of one of those blockbuster actions films where the sky opens up and hell starts raining down.

Only this is for reals. 


A view from the airport.


My buddy Dan took these from his yard.



For people with asthma, this is a particularly difficult time. Keep your fingers crossed that we get some rain tomorrow - the forecast says there's a chance. 

Tuesday, July 09, 2013

Another simple repair....

This door might qualify as one of the worst engineered doors I've ever seen. The stub tenon machined to hold its corners together failed miserably. I guess that's what helps keep people like me in business. Right?

To compound things - the doors (yes, two poorly made doors!) were hung on an aquarium cabinet. When the tank leaked - the drawers dampened and swelled, popping those corners wide open. 


 The good news is.... we have the technology to fix it!

I waited for the wood to dry out a bit - in this weather, in didn't take long. Once I could pull the joint closed, the repair was a simple one. 


Thanks to my friends in the medical world, I have a good supply of syringes, perfect for injecting glue into small places. 


A bit of glue, injected along the entire length of this joint mostly did the trick, as this bit of squeeze-out proves.


Clamping in both directions was necessary, I had to coax the joint back together. 



These clamp pads keep the wood from being damaged.




Finally - to ensure that the joint didn't separate in the future, I decided to pin it. The size of the tenon didn't give me much wiggle room, so an 1/8" pin was all I could manage.


Of course, I didn't want to accidentally drill through the face of the door, so I needed a stop on my bit. Some people use a piece of tape, but that doesn't work so well for me. I've accidentally drilled through things using tape as a depth stop - so I pulled out one of my Fuller Tapered Countersink bits and flipped the stop backwards, to create my stop. I can't tell you how useful these bits are!


Call me McGuyver. 


An 1/8" dowel and a dab of glue adds a great deal of strength to this joint. I pinned each corner of the door, to ward off future problems.




Once the glue dried, I pared the pins flush with a VERY sharp chisel and...


another repair completed!

Wednesday, July 03, 2013

Random shots around the shop...

It's been a while since I did a "random thoughts and shots around the shop" post, so here goes....

I have a week-long break before a new session of classes start back up - and I'm usually found ass-up in the air, fixing the tools. 


The good news is - eight new woodworkers joined the ranks of Wood It Is! graduates. 

They look pretty proud.









Kevin (below) stopped by the shop to do some router work in MDF.


 It's nasty work, and combined with the heat - well - it is miserable! 


The MDF dust combined with sweat makes a decent wood putty!


I suspect he hosed himself off in his yard before he entered his house.


Lupe's working on a new project - an interesting jig for scooping out seat blanks on a tablesaw. She's tireless in the shop, so she made the seat, 


and then the jig!


 I'll blog about the seat scooping jig, and the process of using it, in a few weeks, after we test it out. 

Can you ever have enough clamps?


 I thought it would be a nice touch to add a wood sample board to the shop. 


Eric put it all together for me, hanging the pegboard first, and then all of the samples. 


Anyone who is a Giants fan will get this. 
  


Speaking of Eric, he's working on a three legged stool, 


and spent the afternoon playing with the tricky angles. 


Gillian is in town for a few months, she's the wardrobe supervisor for the Priscilla, Queen of the Desert show. She's wicked with a sewing machine, and her table saw skills aren't too shabby, either!


She's becoming the plug queen in the shop!



This board has about 30 plugs!


Anyone who has taken a Basic Woodworking class will recognize what this shot is about.


My new Coozie - a bottle of water gets hot pretty fast in the shop when it is 118˚ outside.


Group shot in the shop, with Kris' dad, who was in town for a visit. He's sitting in the stool that Lupe just built - but I forgot to get a picture of the stool! D'oh!


Another student brought me a gift - a new pencil holder that she made for the shop. Way  cool! She even filled it!


I spent a couple of weeks making some Peace Pipes for a customer - and the lathe work was interesting. 


I made four pipes, and sold two of them. 


Finally - a very old friend and I re-connected this week, after 50 years. Yes, that's not a typo. Here we are, the middle two kids in this shot. (Damn, I'm always the shortest!) That's my sister on the far left. Looks like a fun summertime shot. 

Speaking of that, have a very safe Fourth of July!


Monday, July 01, 2013

Subcultures: Inside the world of woodworkers

(Thanks to my friend Diana for sending this my way!)